Piedmont Handgunners AssociationThe Friendliest Shooting Club In North Carolina |
Gate Mechanical Failures
In the event of a gate mechanical failure, there is an override to disengage the gearbox from the gate actuator. This releases the gate so it can be moved by hand to the open or closed position. First, confirm the gate is inoperable by rescanning your credentials at the keypad. If there are no lights on the keypad or the gate does not open, proceed to manually unlock the gate. The actuator (motor) for the gate is located near the gatehouse.

On the lower front of the gate actuator, you will find a combination lock. The combination to this lock is on the back of your membership badge.

Enter the combination, unlock and remove the pin. Now move the gate foot pedal down and to the right to disengage the gearbox.

Please call the number posted on the gatehouse immediately to alert management of the issue. Also, please go to the old farm gate and put it back into service. The gate is normally secured in the open position with a combination lock. The combination is the four-digit code on the back of your membership card. Please lock the gate in the closed position until the issue is resolved and leave the lock and pin for the manual override somewhere management can find it.
All rights reserved by Piedmont Handgunners Association